FLOWCINE Dual Black + RONIN 2

FLOWCINE BLACK Dual + DJI RONIN 2

FLOWCINE Dual Black + RONIN 2

The Dual Black is, just like its little brother, the Black Complete, a dampening system with a additional vibration mount, for stabilizing roll and tilt errors as well as vertical motion and vibrations. In difference to the Black Complete, the Dual Black is designed to be able to accommodate much larger gimbals and flight heads, like the Freefly MoVI XL for example, and it takes weights up to 64kg / 141lbs.
It ships with the new Tranquilizer XL, all nicely packed in two black flight cases with wheels.

Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.

The Dual Black mounts to standard 48-52mm speed rail with the four included clamps. The four clamps can be moved around on the Back plate, allowing for a flexible mounting solution. There is also an option to rig the Dual Black on to a bazooka style mount with the 150mm clamps (sold as an accessory).

The Tranquilizer XL

The Dual Black ships with the new Tranquilizer XL. It’s a larger and more robust version of the Tranquilizer that is designed to take the load and the much stronger pan motors of the larger gimbals and flight heads.
Just like the Tranquilizer, the Tranquilizer XL has changeable polymer o-rings that dampens the vibrations. By choosing the right o-rings for your setup, you can fine tune the performance and get better results. The Tranquilizer XL also have changeable Pan Barrels. These are the links that run around the unit, and their job is to keep the pan axis dampened separately from the other axes. This way, you can have the pan axis much stiffer, to be able to use the full torque for your gimbals pan motor, without having the gimbal end up in self oscillation.
The Tranquilizer XL ships with Pan Barrels shore 50 and O-rings between shore 40 to 60.

Documents to download …

Videos …

Below are some tutorials on how to set up and adjust your Black: 

Estabilizador DJI Ronin 2

The simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.

Enhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features.

Power systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximize shooting time.

Built-In Functions

Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Handheld, Car Mount, Aerial & Tripod Mode

Axis Modes

-3-axis

-Pan-Lock
Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
Bluetooth Module
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
Temperature Sensors
Built-in Display
Built-in GPS
USB Type-C Connection
Power and Video Signal through Slip Ring

 

Peripheral

Camera Tray DimensionsMaximum depth from the center of gravity on camera base plate: 250 mm
Maximum height measured from top of the camera base plate: 190 mm
Maximum width: 170 mm
Accessory Power Connections14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)
GCU Input PowerIntelligent Battery: 4280 mAh-22.8 V
Connections2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
PC Assistant Software RequirementsWindows 7 or above; Mac OS X 10.11 or above
Mobile Assistant Software RequirementsiOS 9 or above; Android 4.4 or above

 

Mechanical & Electrical Characteristics

Working CurrentStatic current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
Run Time8 hours
2.5 hours (when powering gimbal, camera and accessories at the same time)
Operating Temperature-4°F ~ 122°F (-20°C ~ 50°C)
WeightIncluding handle bar: 14 lb (6.4 kg)
Excluding handle bar: 11 lb (5.0 kg)
Gimbal DimensionsExcluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H

 

Working Performance

Load Weight (Reference Value)30 lbs (13.6 kg)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 400°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°

 

Documentos / Descarga

Videos …